New Computer

New Computer

Postby CarolBly » March 20th, 2017, 7:23 pm

I got a new computer. Of course, now that the old computer has been reformatted, it occurs to me that I had a couple of program files that I missed. I've gone onto the SCAL forum to see what I need to do to get that reinstalled. Do I also need to install something for the cutter, too? Or, is it all embedded within SCAL? Thanks so much,
Carol
CarolBly
 
Posts: 27
Joined: March 10th, 2015, 1:46 am
Cutter: Silver Bullet Pro 24"

Re: New Computer

Postby Gigi » March 20th, 2017, 11:05 pm

Not sure exactly what you are asking. But if you reinstall SCAL, the drivers will be installed for the Silver Bullet. You will just need to be sure that you have the correct port chosen and you should be good to go. If you get stuck just holler.

If it's any consolation, I had to reformat my computer a few months ago and had no issues getting the SB working once SCAL was installed. Good luck.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: New Computer

Postby CarolBly » March 21st, 2017, 8:22 am

Great. Thanks so much!
Update - Just reviewed Sherri's original email. All is updated and all is good!
C
CarolBly
 
Posts: 27
Joined: March 10th, 2015, 1:46 am
Cutter: Silver Bullet Pro 24"

Re: New Computer

Postby Gigi » March 21st, 2017, 9:43 am

Ok great. Thanks for letting us know!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to General

Who is online

Users browsing this forum: No registered users and 15 guests