Mounting test pen

Mounting test pen

Postby RobHatton » February 1st, 2017, 11:38 pm

What's the trick to mounting the test pen in the Silver Bullet? It's a smaller diameter that the blade or embossing holders. There's not enough range on the clamp to hold the test pen. Should it have a bushing?

Thanks in advance!
RobHatton
 
Posts: 1
Joined: February 1st, 2017, 11:28 pm
Cutter: 24" Silver Bullet Professional

Re: Mounting test pen

Postby Gigi » February 2nd, 2017, 12:28 am

The test pen goes in the black plastic holder that came with your machine. You may need to use some tape to hold it in place. It is just to use to get used to where your things will cut on the real mat in relation to the virtual mat. Most people only use the test pen a few times, if at all.

There is a pen tool holder that comes in three parts and holds a wide variety of pens if you want to do writing or drawing. Again - this is just a learning tool that you have the option to use if you choose.

Hope that helps.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10434
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to Silver Bullet Professional Series

Who is online

Users browsing this forum: No registered users and 0 guests

cron