60° Plus Blade

60° Plus Blade

Postby raneymd » December 1st, 2017, 3:19 am

Hello all,

How does one use the 60° Plus blade? I haven't found anything on specifics of how one uses it differently than the normal 60° blade, and I'm wary of damaging my blade by misusing it.

Thanks!
raneymd
 
Posts: 3
Joined: June 18th, 2014, 4:40 pm
Location: Switzerland
Cutter: Silver Bullet 24"

Re: 60° Plus Blade

Postby Gigi » December 1st, 2017, 10:59 am

There is a lot of information out there on the 60 degree plus blade. You can look at the videos under the Broadcast topic for more information on all of the Silver Bullet accessories including blades. viewtopic.php?f=54&t=5690

Basically, the blade in question is for cutting chipboard and any thicker material, heavy cardboard, some plastics or acrylics, thin matboard, etc.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: 60° Plus Blade

Postby raneymd » December 5th, 2017, 3:26 am

I didn't find 60° Plus in there before, but I guess I wasn't looking closely enough. Thanks!
raneymd
 
Posts: 3
Joined: June 18th, 2014, 4:40 pm
Location: Switzerland
Cutter: Silver Bullet 24"

Re: 60° Plus Blade

Postby Gigi » December 5th, 2017, 9:16 am

You are welcome!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to Tips, Tricks, Community Help

Who is online

Users browsing this forum: No registered users and 18 guests