Welding/Merging - Help

Welding/Merging - Help

Postby blbolinger » July 7th, 2015, 4:17 pm

I am attempting to weld or merge this font....it doesn't appear to be working when I click Merge..maybe merge is not the option I want? Can someone help guide me to get this task complete. I have attached the 2 letters that are connected and need merging. Thanks in advance!
Posts: 2
Joined: July 7th, 2015, 4:15 pm
Cutter: Silver Bullet Pro 24"

Re: Welding/Merging - Help

Postby Gigi » July 7th, 2015, 4:42 pm


There is nothing attached. And you don't want to merge - you want to weld which is on the right hand bar under the wrench. You can go through the help menu in the software and that explains it fully - you can weld or do a union. Assuming they are connected (you usually have to break the letters apart, move them together so they are overlapping, and then I usually group and then weld. Then if you click on the preview tab on the top of the software bar, it will show you that they are connected even though it will not look that way on the virtual mat.

Hope that helps. Without a picture it is hard to see what you might be missing but hope it's just a matter of clicking the right option.

Here is a tutorial on the Craftedge website - there is a LOT of information there...

http://craftedge.com/tutorials/tutorial ... _video.php

Scroll down to Creating - #5. That should help.
Silver Bullet Admin
Silver Bullet Tech Support


Happily using an 18" Silver Bullet Pro
User avatar
Posts: 9809
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Welding/Merging - Help

Postby dawneula » December 1st, 2015, 10:52 pm

Thank you Gigi! The Craftedge website is a treasure trove of information!
Posts: 2
Joined: August 18th, 2015, 7:45 pm
Cutter: 24" Professional Series

Return to Tips, Tricks, Community Help

Who is online

Users browsing this forum: No registered users and 1 guest