width of print and cut on 24 inch machine

width of print and cut on 24 inch machine

Postby 4children » April 14th, 2015, 10:59 am

Hi all,

How wide can you print and cut on a 24 inch machine. I believe I have to account for where the laser is located. I will just play with it but thought maybe someone was on that knew the answer. Loving my Silver Bullet. Thanks :D
Happy owner of a 24" Silver Bullet!
http://alliescraftgarden.blogspot.com
Pam in Concord, CA
4children
 
Posts: 103
Joined: June 13th, 2011, 11:56 am
Cutter: 24 inch silver bullet

Re: width of print and cut on 24 inch machine

Postby Gigi » April 14th, 2015, 11:04 am

That will depend on how wide your printer will cut and each printer is a little different. When you do a preview you will see where the registration marks will be. So the print and cut will do a full 24" but you need to account for the registration marks when you are calculating that......
And also remember that the distance is measured from the right of the machine to the left, so your 24 inches will be from where the blade holder sits over.......24" to the left.

Hope that makes sense! And if need be, you can set your registration marks closer than the default. It won't make a lot of difference, but it will give you a little more room to "play"...
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: width of print and cut on 24 inch machine

Postby 4children » April 14th, 2015, 11:28 am

Thank you very much Gigi! It totally makes sense. You are always so helpful. :bighug:
Happy owner of a 24" Silver Bullet!
http://alliescraftgarden.blogspot.com
Pam in Concord, CA
4children
 
Posts: 103
Joined: June 13th, 2011, 11:56 am
Cutter: 24 inch silver bullet

Re: width of print and cut on 24 inch machine

Postby Gigi » April 14th, 2015, 12:49 pm

Thank you, Pamela. Glad it made sense and helped. Good luck. Would love to see what you are creating when you are ready to share! :)
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to Tips, Tricks, Community Help

Who is online

Users browsing this forum: No registered users and 17 guests

cron