Page 1 of 1
What am I missing?
Posted:
November 1st, 2021, 4:39 pmby janrichards
All of a sudden my SB will not cut on one pass. I have a new blade, a new mat and the paper is Recollections from Michael's, which I have used for a long time with no issues. My speed is 800 and pressure is 60 and it took three passes to cut. Is there anything else anyone can think of, I am totally baffled.
Thanks
Re: What am I missing?
Posted:
November 2nd, 2021, 4:48 pmby Gigi
Have you done a machine reset? Did you do a test cut to be sure the pressure and blade are set correctly? Have you tried to cut just a simple shape to see what happens?
Would definitely start with a machine reset before trying too many other things.
Re: What am I missing?
Posted:
November 2nd, 2021, 5:52 pmby janrichards
I had tried all of those but finally figured it out. It was my blade holder! I switched back to the old clik holder and it is working fine. I will probably need to order a new holder but this is working for now. Thanks Gigi for always being there!
Re: What am I missing?
Posted:
November 4th, 2021, 10:28 amby Gigi
You are welcome. The blade placement and holder would have been my next thought so glad you figured it out. I love that holder. Enjoy the cutting again!