Hi All, been using the Silver Bullet for a couple of years and am having mixed success with print and cut. Here's my issue: My keyboard becomes dead after loading the page into the machine and I'm not able to fine tune registration marks with the laser. I somehow pressed some buttons on the machine and then it triggered keyboard use but I haven't been able to replicate the steps. Here's my usual process:
1) print the page from pnc menu on screen; load mat and place blade on lower right hand corner of page; press set origin on machine and then press online on machine. There is no action from the machine at this time. (btw, using wysing mode in software menu) Sometimes the laser is on and sometimes it's off.
2) press the next button on software menu to align laser with registration marks; press the arrow keys or shift arrow and there is no response from the machine. I can use the arrows on the machine to move the laser but not able to line up accurately.
I am wondering: what do I do on the machine controls after loading the mat?
SCAL 5.029
Mac Catalina 10.15.4
Note: I have the software "use software speed and pressure" clicked on the menu.
Sure would appreciate some light on this situation - many thanks! TP