by MeFlick » September 3rd, 2018, 7:44 am
Like Gigi noted, you need to give a lot more detail for someone to help you troubleshoot. But, that said - the first thing to check is to make sure you put the cutter back online after you set the orientation. What you are describing is what you would see happen if your cutter is not online. It seems like a simple thing, but is a step many of us can forget from time to time, especially if we do not use our cutters regularly every day. If that is not it, another thing to check is to make sure the baud rate is set correctly on the machine and in the software.
Go Vols!