Detail blade

Detail blade

Postby Kayholistics » December 10th, 2017, 3:52 pm

Question. I have detail blade and it says to put the spring on. Apparently, the springs are already on. My question is how do you remove the plastic cover without damaging the spring?
Kayholistics
 
Posts: 4
Joined: February 12th, 2016, 8:49 pm
Cutter: prospective buyer

Re: Detail blade

Postby Gigi » December 10th, 2017, 5:39 pm

Sometimes the spring comes off the blade. I don't understand what plastic you are talking about. You just unscrew the bottom of the detail blade holder, insert the blade with the spring and screw it back together. You just want to be sure you don't lose the little spring so you might want to put a piece of white paper or foam, so you can see the spring if it falls off.
Silver Bullet Admin
Silver Bullet Tech Support
Image

http://craftingcrumbs.blogspot.com

Happily using an 18" Silver Bullet Pro
User avatar
Gigi
 
Posts: 9809
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest

cron