Re: Strange looking cut
Posted: July 10th, 2017, 12:57 am
This is hard to follow with all of the back and forth - but will comment on the most apparent things. Dawn mentioned in an earlier post that using the Roland blade with a 1 mm offset will never give you a good result cutting a small circle. So not sure why you are using that one as it is not going to produce a good result. Did you drop the overcut to zero as she suggested?
Since you are able to get good results with the click blade holder and the SB blade (60 degree) and the other 45 degree blade - why don't you just use what works? I love the click blade holder and use it for everything.
If you are concerned about the regular blade holder, you can certainly contact Sherri and see what she suggests. She would probably like to test the holder herself to see if she has issues with it. But in the meantime, since you have found something that works, I would stay with that while replacing the regular blade holder if that is the issue.
Since you are able to get good results with the click blade holder and the SB blade (60 degree) and the other 45 degree blade - why don't you just use what works? I love the click blade holder and use it for everything.
If you are concerned about the regular blade holder, you can certainly contact Sherri and see what she suggests. She would probably like to test the holder herself to see if she has issues with it. But in the meantime, since you have found something that works, I would stay with that while replacing the regular blade holder if that is the issue.