Question - 24" Silver Bullet Pro machine

Question - 24" Silver Bullet Pro machine

Postby Mukul » October 18th, 2016, 1:48 pm

Hello,

I am interested in buying the "24" Silver Bullet Professional Series" machine. I would like to know what is included in the box. I would like to also know the detailed specifications of this cutter (for example: mechanical specs and tolerances, electrical requirements, software requirements and compatibility, materials that can be used with this cutter) and whether I need to purchase any additional blades or other supplies that are not included with the cutter.

Thanks,
Mukul
Mukul
 
Posts: 15
Joined: October 18th, 2016, 1:38 pm
Cutter: 15" Silver Bullet Pro

Re: Question - 24" Silver Bullet Pro machine

Postby Gigi » October 18th, 2016, 2:26 pm

You can contact Sherri at Silver Bullet Cutters and she can address your questions more completely.
1-877-627-1199

Yes you can purchase additional accessories through Sherri. You can also reach her via email at info@silverbulletcutter.com
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Question - 24" Silver Bullet Pro machine

Postby Mukul » October 18th, 2016, 3:21 pm

Hi Gigi,

Thanks for letting me know. I will contact Sherri and I have already sent an email using the address that you have provided.

Thanks,
Mukul
Mukul
 
Posts: 15
Joined: October 18th, 2016, 1:38 pm
Cutter: 15" Silver Bullet Pro

Re: Question - 24" Silver Bullet Pro machine

Postby Gigi » October 18th, 2016, 3:59 pm

You are very welcome. She is the co-designer of the machine and can directly answer any machine specifics that you have.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Question - 24" Silver Bullet Pro machine

Postby Mukul » October 19th, 2016, 1:47 pm

Hi Gigi,

Thanks for your reply. As you had suggested I tried calling the number and left a message. I had already sent an email a couple of days ago but have not received any reply yet. Please let me know how I can get the information about this cutter so that I can order this machine.

Thanks,
Mukul
Mukul
 
Posts: 15
Joined: October 18th, 2016, 1:38 pm
Cutter: 15" Silver Bullet Pro

Re: Question - 24" Silver Bullet Pro machine

Postby Gigi » October 19th, 2016, 2:55 pm

Sherri answers emails and returns phone calls within 24 hours.

Oops - I typed too fast - the email address is missing an "s" - it should be info@silverbulletcutters.com

I apologize.

Most of the information you are asking about can be found on the forum. Included is the cords to make it work (power and usb), blade holder, 45 degree blade and 60 degree blade, renu sheets, a setting tool and a mat. Doing this off the top of my head.

Included with the purchase is access to download SCAL 4 software (which contains the drivers for the machine) and access to the Learning Center and tech support if needed. You can use Inkscape, Illustrator, Corel Draw to create, and then would cut them in the SCAL software.

The machine will cut pliable metal, paper, card stock, fabric (stiffened), some leather, some mat board, chipboard - thickness on some of those materials matters m- you can also emboss and engrave on metals, acrylic, leather etc. You can see examples of all of that at www.silverbulletcutters.com

Hope that helps a little in the meantime. And I think I already said additional supplies can be purchased.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Question - 24" Silver Bullet Pro machine

Postby Mukul » October 19th, 2016, 4:37 pm

Hi Gigi,

Thanks a lot for providing great information about this cutter. I will check the forum also. I would like to make sure that this cutter will work with Mac OS X (Version 10.10 - Yosemite) and onwards. Could you please confirm? It will be very helpful.

Thanks,
Mukul
Mukul
 
Posts: 15
Joined: October 18th, 2016, 1:38 pm
Cutter: 15" Silver Bullet Pro

Re: Question - 24" Silver Bullet Pro machine

Postby Gigi » October 19th, 2016, 5:25 pm

Yes - the software is compatible with MAC. You can find more about the software at www.craftedge.com
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Question - 24" Silver Bullet Pro machine

Postby Mukul » October 19th, 2016, 6:19 pm

Hi Gigi,

Thank you very much for the confirmation. I will check the website for the software information.

Thanks again,
Mukul
Mukul
 
Posts: 15
Joined: October 18th, 2016, 1:38 pm
Cutter: 15" Silver Bullet Pro

Re: Question - 24" Silver Bullet Pro machine

Postby Gigi » October 19th, 2016, 6:43 pm

You are quite welcome. It is definitely MAC compatible and always has been.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to General

Who is online

Users browsing this forum: No registered users and 28 guests

cron