by Gigi » August 12th, 2015, 7:41 pm
You don't say which mat you are talking about - but as long as you can fit the other dimension into the machine (Assuming you mean the mat that is basically 15 by 27.75 - yes. You can turn the mat and run it vertically, but your cutting range is only 13" even though the opening is larger, so you need to be sure that you position it to the right of the machine and keep your media in between the 13" cutting width. In other words, as long as it will fit in the opening you can use the mat, but you are still limited by the cutting width of your machine.
Hope that answers your question and makes sense.
Silver Bullet Admin/Tech Support
Happily using an 24" Silver Bullet Platinum
Gigi