Challenge 21 - Shaker Card by JeannetteC

Re: Challenge 21 - Shaker Card by JeannetteC

Postby CaseysAngel » July 10th, 2011, 10:54 am

Beanie that is adorable!!!!!
User avatar
CaseysAngel
 
Posts: 1572
Joined: May 13th, 2011, 10:20 pm
Location: Southern Illinois

Re: Challenge 21 - Shaker Card by JeannetteC

Postby kathybessey » July 10th, 2011, 11:10 am

Love it Beanie!! I was giggling at the saying on your second card -- I made my daughter a sign for her kitchen that says " When Life Gives You Lemons....Break Out the Tequila!"
kathybessey
 
Posts: 1379
Images: 19
Joined: May 15th, 2011, 1:14 am
Location: SW Idaho

Re: Challenge 21 - Shaker Card by JeannetteC

Postby LisaH » July 10th, 2011, 11:13 am

I'm really liking that second card Beanie!!
User avatar
LisaH
 
Posts: 5433
Images: 8
Joined: May 15th, 2011, 3:33 pm
Location: Georgia, USA
Cutter: 24" SB Pro

Re: Challenge 21 - Shaker Card by JeannetteC

Postby JeannetteC » July 10th, 2011, 11:28 am

Thanks Christy!

kathybessey wrote:Jeannette - what do you use to adhere the craft foam to your cardstock?

I had the foam tape, so it is already sticky. I think most adhesives work on the foam. I would try my ATG gun on it first. I love my ATG, lol!
JeannetteC
 
Posts: 717
Joined: May 15th, 2011, 1:35 pm
Location: Cambridge, Ontario

Re: Challenge 21 - Shaker Card by JeannetteC

Postby JeannetteC » July 10th, 2011, 11:28 am

Great cards Beanie. Love the second one!
JeannetteC
 
Posts: 717
Joined: May 15th, 2011, 1:35 pm
Location: Cambridge, Ontario

Re: Challenge 21 - Shaker Card by JeannetteC

Postby beanie21787 » July 10th, 2011, 11:52 am

lol i already have it in an envie to send to a friend tomorrow LOL....
Image
User avatar
beanie21787
 
Posts: 290
Images: 71
Joined: May 14th, 2011, 8:38 pm
Location: Maryland USA
Cutter: lynx 12

Re: Challenge 21 - Shaker Card by JeannetteC

Postby corwins » July 10th, 2011, 11:55 am

Love them Beanie!
The best and most beautiful things in the world cannot be seen or even touched - they must be felt by the heart. Helen Keller

http://www.mycardspot.blogspot.com
corwins
 
Posts: 814
Images: 9
Joined: May 14th, 2011, 8:26 pm
Location: KS
Cutter: Black Cat Cougar 13"

Re: Challenge 21 - Shaker Card by JeannetteC

Postby Gigi » July 10th, 2011, 12:46 pm

Ok - here is my shaker card (that is also for Challenge 20 - the monochrome challenge). The butterfly on the inside is one of Penny's (surprise!) And I really needed to make a birthday card. Would definitely do that again.

Not sure it shows up well, but the greeting is foiled :D (yep - I did it!!) :hide:

And I repeat, Jeannette did an awesome job with the way this file cuts and goes together!
You do not have the required permissions to view the files attached to this post.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Challenge 21 - Shaker Card by JeannetteC

Postby PennyDuncan » July 10th, 2011, 2:19 pm

Oh Gigi that is SO PRETTY!!!! And I LOVE the foiling!!!!!!! What a beautiful card and my favorite colors!!!!
Have a Blessed Day...Penny Duncan
http://pennyscreativearthaven.blogspot.com
User avatar
PennyDuncan
 
Posts: 3925
Images: 1
Joined: May 14th, 2011, 7:53 pm
Location: Henderson, KY USA
Cutter: 24" SB Pro

Re: Challenge 21 - Shaker Card by JeannetteC

Postby JeannetteC » July 10th, 2011, 2:22 pm

I love it Gigi! I thought that was the foil. I've been trying to be good about that too!
JeannetteC
 
Posts: 717
Joined: May 15th, 2011, 1:35 pm
Location: Cambridge, Ontario

Re: Challenge 21 - Shaker Card by JeannetteC

Postby Gigi » July 10th, 2011, 2:27 pm

Thanks Jeannette - and I understand. I really tried to resist and finally got the laser printer last week when I ordered the Foil Master. I am so glad after just one project that I got it - I can see I will be using it a lot!

Yes - you need it!! OMG - I just wrote that and then thought about another order shipped to Dana!! :ROFLMBO: :ROFLMBO: I can only imagine what she would do with the FoilMaster package!! :ROFLMBO: :ROFLMBO: :roll:
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Challenge 21 - Shaker Card by JeannetteC

Postby JeannetteC » July 10th, 2011, 2:30 pm

CAGigi wrote:Thanks Jeannette - and I understand. I really tried to resist and finally got the laser printer last week when I ordered the Foil Master. I am so glad after just one project that I got it - I can see I will be using it a lot!

Yes - you need it!! OMG - I just wrote that and then thought about another order shipped to Dana!! :ROFLMBO: :ROFLMBO: I can only imagine what she would do with the FoilMaster package!! :ROFLMBO: :ROFLMBO: :roll:


LMBO! :ROFLMBO: :ROFLMBO: :ROFLMBO: That could be reaaaalllllllyyyyyy dangerous! I would need a laser printer too! Do you honestly think Dana would let me out the door a second time with all my toys?
JeannetteC
 
Posts: 717
Joined: May 15th, 2011, 1:35 pm
Location: Cambridge, Ontario

Re: Challenge 21 - Shaker Card by JeannetteC

Postby JeannetteC » July 10th, 2011, 2:38 pm

Oh no, I just looked at the foil master! You guys are just too bad!!!!!!
JeannetteC
 
Posts: 717
Joined: May 15th, 2011, 1:35 pm
Location: Cambridge, Ontario

Re: Challenge 21 - Shaker Card by JeannetteC

Postby Gigi » July 10th, 2011, 4:19 pm

OMG - forgot about the printer although you could probably get that where you are - if Dana had TWO deliveries at one time she just might run away with both!! :ROFLMBO: :ROFLMBO:

Good thing she is busy until tomorrow -gives you a little time to figure all of this out.

Oh I am imagining another great story to come..... :ROFLMBO: :ROFLMBO:
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Challenge 21 - Shaker Card by JeannetteC

Postby JeannetteC » July 10th, 2011, 4:27 pm

CAGigi wrote:OMG - forgot about the printer although you could probably get that where you are - if Dana had TWO deliveries at one time she just might run away with both!! :ROFLMBO: :ROFLMBO:

Good thing she is busy until tomorrow -gives you a little time to figure all of this out.

Oh I am imagining another great story to come..... :ROFLMBO: :ROFLMBO:


Um.... she had 6 deliveries last time! She really should have taken a picture of the stack and posted it. One was hubbies, but she let me take home my wireless headset, printer ink, vinyl (she got some too), Cougar, and foil! She showed VERY GOOD restraint! :ROFLMBO: :ROFLMBO: :ROFLMBO:
JeannetteC
 
Posts: 717
Joined: May 15th, 2011, 1:35 pm
Location: Cambridge, Ontario

Re: Challenge 21 - Shaker Card by JeannetteC

Postby Gigi » July 10th, 2011, 6:05 pm

Well then that cinches it - you just have to order the Foil Master AND a printer and continue the storyline. I am sure we will all be happy to keep the chapters going with new adventures for you (and the kids will be happy too!!) :ROFLMBO:
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Challenge 21 - Shaker Card by JeannetteC

Postby JeannetteC » July 10th, 2011, 6:41 pm

True! I don't think it would take much to convince dd this time!
JeannetteC
 
Posts: 717
Joined: May 15th, 2011, 1:35 pm
Location: Cambridge, Ontario

Re: Challenge 21 - Shaker Card by JeannetteC

Postby Gigi » July 10th, 2011, 8:47 pm

LOL!!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Challenge 21 - Shaker Card by JeannetteC

Postby PennyDuncan » July 10th, 2011, 8:50 pm

JeannetteC wrote:
CAGigi wrote:Thanks Jeannette - and I understand. I really tried to resist and finally got the laser printer last week when I ordered the Foil Master. I am so glad after just one project that I got it - I can see I will be using it a lot!

Yes - you need it!! OMG - I just wrote that and then thought about another order shipped to Dana!! :ROFLMBO: :ROFLMBO: I can only imagine what she would do with the FoilMaster package!! :ROFLMBO: :ROFLMBO: :roll:


LMBO! :ROFLMBO: :ROFLMBO: :ROFLMBO: That could be reaaaalllllllyyyyyy dangerous! I would need a laser printer too! Do you honestly think Dana would let me out the door a second time with all my toys?


:ROFLMBO: :ROFLMBO: :ROFLMBO: :ROFLMBO: :ROFLMBO: OH The story we would get to follow then!!!!!! LOL
Have a Blessed Day...Penny Duncan
http://pennyscreativearthaven.blogspot.com
User avatar
PennyDuncan
 
Posts: 3925
Images: 1
Joined: May 14th, 2011, 7:53 pm
Location: Henderson, KY USA
Cutter: 24" SB Pro

Re: Challenge 21 - Shaker Card by JeannetteC

Postby Gigi » July 10th, 2011, 11:01 pm

Really Penny - don't you just love thinking about it??!!??
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

PreviousNext

Return to Christmas in July

Who is online

Users browsing this forum: No registered users and 57 guests