Need The Foil Master!!!

Need The Foil Master!!!

Postby deewatt » August 6th, 2014, 2:21 am

Hi guys,

Does anyone know when the Black Cat Foil Master will be in stock again? I really need to purchase 1. Or if anyone else know where I can get one to buy.

Thanks much!
"Trust in the Lord with ALL your heart and lean not unto your own understanding"

My Craft Store: https://www.etsy.com/shop/DhorcasDesigns
User avatar
deewatt
 
Posts: 16
Joined: August 3rd, 2014, 8:19 pm
Location: Nampa, Idaho
Cutter: 24" Silver Bullet owner

Re: Need The Foil Master!!!

Postby MeFlick » August 6th, 2014, 7:42 am

When you are inquiring about actual stock for sale, you will get the best answer direct from the Company selling it. If you are in the USA, you would be looking to buy from Sherri at That's Scrap, Inc. If you go to the Company's website where you found the FoilMaster and discovered it was out of stock, you will find a "contact us" page here:http://thatsscrapinc.com/contact-us.aspx, if you contact Sherri through that email and/or phone number provided there, she can give you the correct information needed.
Go Vols!
User avatar
MeFlick
 
Posts: 1501
Joined: May 15th, 2011, 7:23 am
Cutter: 18"Silver Bullet & More

Re: Need The Foil Master!!!

Postby rachellann » August 6th, 2014, 9:44 am

Mary Kobe Peterson is Selling hers she has not had time to use it much and has posted on
Facebook that she is looking to sell hers.
Helping where I can when I can.
Using a 24" Silver Bullet Pro and also have a 18" Cougar
rachellann
 
Posts: 2347
Images: 35
Joined: May 13th, 2011, 10:19 pm
Location: Iowa
Cutter: 18 Cougar, 24"Silver Bullet

Re: Need The Foil Master!!!

Postby deewatt » August 6th, 2014, 10:18 am

rachellann wrote:Mary Kobe Peterson is Selling hers she has not had time to use it much and has posted on
Facebook that she is looking to sell hers.


What facebook page?
"Trust in the Lord with ALL your heart and lean not unto your own understanding"

My Craft Store: https://www.etsy.com/shop/DhorcasDesigns
User avatar
deewatt
 
Posts: 16
Joined: August 3rd, 2014, 8:19 pm
Location: Nampa, Idaho
Cutter: 24" Silver Bullet owner

Re: Need The Foil Master!!!

Postby deewatt » August 6th, 2014, 10:19 am

MeFlick wrote:When you are inquiring about actual stock for sale, you will get the best answer direct from the Company selling it. If you are in the USA, you would be looking to buy from Sherri at That's Scrap, Inc. If you go to the Company's website where you found the FoilMaster and discovered it was out of stock, you will find a "contact us" page here:http://thatsscrapinc.com/contact-us.aspx, if you contact Sherri through that email and/or phone number provided there, she can give you the correct information needed.


Thanks a lot. I did inquire through the website about 5 days now and still no response, so I was trying my luck here. Will try to call them also.
"Trust in the Lord with ALL your heart and lean not unto your own understanding"

My Craft Store: https://www.etsy.com/shop/DhorcasDesigns
User avatar
deewatt
 
Posts: 16
Joined: August 3rd, 2014, 8:19 pm
Location: Nampa, Idaho
Cutter: 24" Silver Bullet owner

Re: Need The Foil Master!!!

Postby Elizabeth » August 6th, 2014, 12:50 pm

Sherri may be on vacation. She is usually very quick to respond to inquiries. Maybe someone can contact Mary and let her know there is a prospective buyer here? I don't have her contact info.

Good to see you here Rachel! It seems to be old friends day here on the Forum! Yay!!!!
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet

Re: Need The Foil Master!!!

Postby Gigi » August 6th, 2014, 1:24 pm

Sherri is around - but she may not be checking the website as often . The best way to reach her is to call or email her directly at thatsscrap@aol.com

I love my FoilMaster! :)
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Need The Foil Master!!!

Postby Mary Kobe » August 6th, 2014, 1:30 pm

thanks, everyone. Yes, I am selling mine. I have used it maybe 20 times. It is packed away in the original box. I am including 6 rolls of 4" wide foil.

you can email me at mkobe59@gmail.com if you need/want more info.

Mary
Mary Kobe
 
Posts: 1570
Images: 2
Joined: May 16th, 2011, 12:15 pm
Location: Kansas City, Kansas

Re: Need The Foil Master!!!

Postby deewatt » August 6th, 2014, 1:36 pm

Mary Kobe wrote:thanks, everyone. Yes, I am selling mine. I have used it maybe 20 times. It is packed away in the original box. I am including 6 rolls of 4" wide foil.

you can email me at mkobe59@gmail.com if you need/want more info.

Mary


Thanks Mary, I emailed you.
"Trust in the Lord with ALL your heart and lean not unto your own understanding"

My Craft Store: https://www.etsy.com/shop/DhorcasDesigns
User avatar
deewatt
 
Posts: 16
Joined: August 3rd, 2014, 8:19 pm
Location: Nampa, Idaho
Cutter: 24" Silver Bullet owner

Re: Need The Foil Master!!!

Postby Elizabeth » August 19th, 2014, 1:52 pm

Miss you here, Mary Kobe. Hope all is well with you.
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet

Re: Need The Foil Master!!!

Postby Mary Kobe » September 3rd, 2014, 7:38 am

I forgot to come back in an update this. I have sold my foilmaster. It is going to a home where it will be used instead of sitting on a shelf.

Mary
Mary Kobe
 
Posts: 1570
Images: 2
Joined: May 16th, 2011, 12:15 pm
Location: Kansas City, Kansas

Re: Need The Foil Master!!!

Postby deewatt » September 3rd, 2014, 2:57 pm

Mary Kobe wrote:I forgot to come back in an update this. I have sold my foilmaster. It is going to a home where it will be used instead of sitting on a shelf.

Mary


Thanks for the Foil Master Mary! I have been foiling up a frenzy... luv it!
See the pic below of my most recent invitation design complete with gold lettering with the foilmaster. And I also used my new silver bullet to cut out the orange monogram on the label of the envelopes and also to cut the crest shape of the white labels that the monogram sits on.

Invite1.jpg
You do not have the required permissions to view the files attached to this post.
"Trust in the Lord with ALL your heart and lean not unto your own understanding"

My Craft Store: https://www.etsy.com/shop/DhorcasDesigns
User avatar
deewatt
 
Posts: 16
Joined: August 3rd, 2014, 8:19 pm
Location: Nampa, Idaho
Cutter: 24" Silver Bullet owner

Re: Need The Foil Master!!!

Postby Elizabeth » September 3rd, 2014, 3:11 pm

Beautiful!!!! The foiling adds such an elegant touch.
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet

Re: Need The Foil Master!!!

Postby LisaH » September 3rd, 2014, 4:23 pm

those are gorgeous
User avatar
LisaH
 
Posts: 5433
Images: 8
Joined: May 15th, 2011, 3:33 pm
Location: Georgia, USA
Cutter: 24" SB Pro

Re: Need The Foil Master!!!

Postby Gigi » September 3rd, 2014, 5:01 pm

Wow - that all looks fabulous. I love seeing someone put all of their machines to work (note to self!!)

Beautiful work!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Need The Foil Master!!!

Postby deewatt » September 3rd, 2014, 11:14 pm

Thank you sooooo much y'all! I really am enjoying my machine tons!!!
"Trust in the Lord with ALL your heart and lean not unto your own understanding"

My Craft Store: https://www.etsy.com/shop/DhorcasDesigns
User avatar
deewatt
 
Posts: 16
Joined: August 3rd, 2014, 8:19 pm
Location: Nampa, Idaho
Cutter: 24" Silver Bullet owner

Re: Need The Foil Master!!!

Postby Gigi » September 4th, 2014, 12:01 am

I can tell - I love seeing all of the creativity . It makes me want to do more! :)

Thanks for sharing!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Need The Foil Master!!!

Postby Angel135612 » September 4th, 2014, 6:38 pm

Love seeing what you are doing... I can't wait for my house to get back to normal so I can start crafting again.
Diane in Colorado Springs
The best angle from which to approach any problem is the try-angle.
User avatar
Angel135612
 
Posts: 3038
Images: 7
Joined: May 14th, 2011, 7:51 pm
Location: Colorado Springs CO
Cutter: 24" Silver Bullet

Re: Need The Foil Master!!!

Postby Sharon » September 4th, 2014, 6:49 pm

Your work is beautiful!
Image
User avatar
Sharon
 
Posts: 277
Joined: May 14th, 2011, 10:01 pm
Location: San Antonio, TX
Cutter: 24" Silver Bullet Platinum

Re: Need The Foil Master!!!

Postby PennyDuncan » September 21st, 2014, 10:09 pm

I agree with everyone your pieces are very pretty!!!
Have a Blessed Day...Penny Duncan
http://pennyscreativearthaven.blogspot.com
User avatar
PennyDuncan
 
Posts: 3925
Images: 1
Joined: May 14th, 2011, 7:53 pm
Location: Henderson, KY USA
Cutter: 24" SB Pro


Return to Items For sale

Who is online

Users browsing this forum: No registered users and 16 guests

cron