Silver Bullet Pro Series 24" for sale

Silver Bullet Pro Series 24" for sale

Postby wolvesandcubs » July 29th, 2017, 12:04 pm

Gently used Silver Bullet Pro, 24". Purchased in 2014 for my wife who has never really found the time to fully learn and utilize the machine. We also purchased the "Got to have it all" package and all pieces/parts are still accounted for. The mats will be included but are used and you would be better off purchasing new.

We just never really got the hang of the machine and it has been collecting dust and moving with us for years. we are prior military, so the machine is well traveled :D

We are asking 750.00 or best offer plus shipping (approx 80 dollars).

thank you
Chuck
wolvesandcubs
 
Posts: 5
Joined: March 28th, 2014, 8:54 pm
Cutter: SB-24 24" SILVER BULLET

Re: Silver Bullet Pro Series 24" for sale

Postby ElffutS » August 12th, 2017, 2:26 pm

Is this still for sale?
ElffutS
 
Posts: 3
Joined: August 12th, 2017, 2:20 pm
Cutter: No idea

Re: Silver Bullet Pro Series 24" for sale

Postby wolvesandcubs » August 13th, 2017, 11:38 am

Yes it is.
wolvesandcubs
 
Posts: 5
Joined: March 28th, 2014, 8:54 pm
Cutter: SB-24 24" SILVER BULLET

Re: Silver Bullet Pro Series 24" for sale

Postby Solherrero » October 8th, 2017, 4:31 pm

If this item is still available I'm interested if you'll take $700 for it.
Please reply. Thanks
Solherrero
 
Posts: 9
Joined: July 9th, 2017, 8:46 pm
Cutter: Prospective Buyer

Re: Silver Bullet Pro Series 24" for sale

Postby wolvesandcubs » October 8th, 2017, 8:04 pm

Just want to confirm, that’s 700 plus shipping (about 80), correct? If so, we have a deal. Just let us know. Thank you
wolvesandcubs
 
Posts: 5
Joined: March 28th, 2014, 8:54 pm
Cutter: SB-24 24" SILVER BULLET

Re: Silver Bullet Pro Series 24" for sale

Postby Solherrero » October 9th, 2017, 10:44 am

Hello. Please tell me where did you buy this machine and where will it be sent from. Will you?
Solherrero
 
Posts: 9
Joined: July 9th, 2017, 8:46 pm
Cutter: Prospective Buyer

Re: Silver Bullet Pro Series 24" for sale

Postby Gigi » October 9th, 2017, 3:11 pm

You can see in their profile that it was purchased from an authorized dealer - That's Scrap Inc - Sherri Jensen. You can PM or email them if you want further information. Warranty should not be an issue as there are very few things that can go wrong with the machines, and we have replacement parts for those. Many of us have had these machines for 5 years and have not replaced a thing, other than consumables. Good luck.
Silver Bullet Admin
Silver Bullet Tech Support
Image

http://craftingcrumbs.blogspot.com

Happily using an 18" Silver Bullet Pro
User avatar
Gigi
 
Posts: 9754
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Silver Bullet Pro Series 24" for sale

Postby Solherrero » October 10th, 2017, 12:19 am

Thank you Gigi!!
And how do I see their profile??
Also, how do I contact Sherri?
Thanks!
Solherrero
 
Posts: 9
Joined: July 9th, 2017, 8:46 pm
Cutter: Prospective Buyer

Re: Silver Bullet Pro Series 24" for sale

Postby Gigi » October 10th, 2017, 1:25 am

The profile is to the right of their post - just like to the right of your post I can see your information.

If you want to contact Sherri about the used machine plan, you can reach her at info@silverbulletcutters.com Be sure to give her the name of the person who is the original owner of the machine (if you know which machine you are purchasing) so she can transfer the ownership.

You can reach me at admin@silverbulletcutters.com if you have other questions and would rather not post them.
Silver Bullet Admin
Silver Bullet Tech Support
Image

http://craftingcrumbs.blogspot.com

Happily using an 18" Silver Bullet Pro
User avatar
Gigi
 
Posts: 9754
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Silver Bullet Pro Series 24" for sale

Postby Solherrero » October 10th, 2017, 2:23 pm

Thank you Gigi!!
Solherrero
 
Posts: 9
Joined: July 9th, 2017, 8:46 pm
Cutter: Prospective Buyer

Re: Silver Bullet Pro Series 24" for sale

Postby Solherrero » October 10th, 2017, 2:33 pm

wolvesandcubs
I do want to buy it. Please check your inbox. I sent a PM
Solherrero
 
Posts: 9
Joined: July 9th, 2017, 8:46 pm
Cutter: Prospective Buyer

Re: Silver Bullet Pro Series 24" for sale

Postby Gigi » October 10th, 2017, 3:48 pm

Just so you know, Maria, when you send a PM the person gets a notification that there is a message on the forum. It's just an extra way to remind someone to check! So I am sure they will get back to you as soon as possible.

Good luck!
Silver Bullet Admin
Silver Bullet Tech Support
Image

http://craftingcrumbs.blogspot.com

Happily using an 18" Silver Bullet Pro
User avatar
Gigi
 
Posts: 9754
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Silver Bullet Pro Series 24" for sale

Postby Solherrero » October 12th, 2017, 1:54 pm

wolvesandcubs
Please reply. I do want this machine ;)
Solherrero
 
Posts: 9
Joined: July 9th, 2017, 8:46 pm
Cutter: Prospective Buyer

Re: Silver Bullet Pro Series 24" for sale

Postby Gigi » October 12th, 2017, 2:34 pm

I just PM'd the email address to you if that helps.
Silver Bullet Admin
Silver Bullet Tech Support
Image

http://craftingcrumbs.blogspot.com

Happily using an 18" Silver Bullet Pro
User avatar
Gigi
 
Posts: 9754
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Silver Bullet Pro Series 24" for sale

Postby wolvesandcubs » October 12th, 2017, 7:27 pm

Maria,

sorry for not getting back to you sooner. I don't have the ability to draft a PM; sorry about that. Not sure if I can't figure it out or it hasn't been enabled. The machine is still available and I did purchase from That's Scrap Inc and haven't really used it. We have all the original shipping material (as it was a condition for warranty work, if it ever needed it). We will be please to sell it to you. Again, don't know why I can't PM but I do get your PM messages. If you like, please PM me your direct email and we sort out the PayPal piece. We will be shipping two boxes, the SB in its original container and another smaller box with the accessories and cutting mats. The mats are little worn but you may still get some use out of them. Not sure if the picture had the shelf in it, but the plastic shelf/tray for the front/back of the cutter are also included. Everything is in great shape vice some dust.

Again, sorry for getting back to you late and please PM us your email address and we can go from there.

thank you
Chuck
wolvesandcubs
 
Posts: 5
Joined: March 28th, 2014, 8:54 pm
Cutter: SB-24 24" SILVER BULLET

Re: Silver Bullet Pro Series 24" for sale

Postby Gigi » October 12th, 2017, 9:30 pm

Chuck -

Go to your user control panel - it appears at the top of the page right above the heading for this thread. Click on that. Then click on the tab that says "Board Preferences". My guess is that you have the boxes all checked no which includes the ability send private messages. There are lots of options that you can activate or deactivate - so that is why you aren't seeing what the rest of us are.

I sent Maria your email so you may have heard from her already. But if you want to activate that option for the rest of your time on the forum, that is what you need to do!

Good luck. And please let us know when the machine is definitely sold. Thanks and I wish you the best.
Silver Bullet Admin
Silver Bullet Tech Support
Image

http://craftingcrumbs.blogspot.com

Happily using an 18" Silver Bullet Pro
User avatar
Gigi
 
Posts: 9754
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Silver Bullet Pro Series 24" for sale

Postby wolvesandcubs » October 15th, 2017, 4:52 pm

Gigi,

I went and checked all my settings; its giving me this error:
"We are sorry, but you are not authorised to use this feature. You may have just registered here and may need to participate more to be able to use this feature."
wolvesandcubs
 
Posts: 5
Joined: March 28th, 2014, 8:54 pm
Cutter: SB-24 24" SILVER BULLET

Re: Silver Bullet Pro Series 24" for sale

Postby Solherrero » October 15th, 2017, 10:51 pm

Hello Chuck. I just sent you an email. Please check your inbox, right?
Thank you
Solherrero
 
Posts: 9
Joined: July 9th, 2017, 8:46 pm
Cutter: Prospective Buyer

Re: Silver Bullet Pro Series 24" for sale

Postby Gigi » October 15th, 2017, 11:05 pm

That is the strangest thing. I checked all of the admin settings and there is just nothing there. Everyone who signs up had immediate access to all of those features. Will try to figure it out!
Silver Bullet Admin
Silver Bullet Tech Support
Image

http://craftingcrumbs.blogspot.com

Happily using an 18" Silver Bullet Pro
User avatar
Gigi
 
Posts: 9754
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Silver Bullet Pro Series 24" for sale

Postby Gigi » October 16th, 2017, 6:00 pm

wolvesandcubs Your PM button seems to be enabled now. I made sure you showed up under registered users rather than newly registered users. That may have made the difference.

Hope that helps.
Silver Bullet Admin
Silver Bullet Tech Support
Image

http://craftingcrumbs.blogspot.com

Happily using an 18" Silver Bullet Pro
User avatar
Gigi
 
Posts: 9754
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to Items For sale

Who is online

Users browsing this forum: No registered users and 1 guest