Save with registration marks?

[dlhill]

I need to make a large number of print and cut tags for my church. They want to print them at church. Is there a way to save the file with the registration marks on it, so they can print the quantity they need, and I can cut them?
Thanks!

[Gigi]

The easiest thing I can think of is to print one, scan and save it as a PDFand then print them in bulk that way. Would that work??

[Suzan]

And Make sure they are saved at 100 percent. Don't let it adjust the sizes to the page size.

[dlhill]

That probably would work. Thanks. In the past I print one here and they use the copier. This year the woman making the tags wanted to print them from the printer. I will give it a try. Thank you.

[MeFlick]

That probably would work. Thanks. In the past I print one here and they use the copier. This year the woman making the tags wanted to print them from the printer. I will give it a try. Thank you.

If you had a laptop with your program of choice that you use for cutting (be it SCAL, MTC, Inkscape, etc.) - you could take that computer to the church and print directly to the printer there. you might have to add the printer to your computer - but it should work that way. Of course, if you only work from a large desktop - that's probably not an option! Even if you don't normally use the laptop for cutting - you could do this to get the print job done.

[LimaDesigns]

export project> png> choose to save with reg. marks.
now reg marks are part of image and can be printed from anywhere