Silver Bullet Cutters Forum

by **2ndchance55** » March 24th, 2012, 5:14 pm

Hi,
I am using SCAL3 and have a Mac. I have the Mac and Lynx working but at the end of a cut it does not finish and the blade remains in the down position.
Am I missing yet something else here?
It cuts beautifully other then at the end.

Thanks for anyone out there that can help me.
-d

by **rachellann** » March 24th, 2012, 6:06 pm

Can you clarify which version of scal you are using? scal3 -3.022 or an older version

by **2ndchance55** » March 24th, 2012, 6:37 pm

I am using 3.022

by **rachellann** » March 24th, 2012, 6:54 pm

Is this happening with all files or just larger ones.
Also please make sure to send a support ticket to Bandon over at sure cuts alot Craft edge so this is also brought to his attention.

by **2ndchance55** » March 25th, 2012, 6:58 am

Seems to be all the things i try to cut.
How do I send the info to Brandon?

by **2ndchance55** » March 25th, 2012, 8:13 am

I just reset the Lynx and the file cut ok. I will try a larger file next.

by **2ndchance55** » March 25th, 2012, 8:32 am

OK, just cut a larger file and everything seem great!
Thanks for responding!!

Dorothy

by **rachellann** » March 25th, 2012, 10:07 am

2ndchance55 wrote:Seems to be all the things i try to cut.
How do I send the info to Brandon?

here is the link sorry I didn't get back here to further follow up.
http://www.craftedge.com/contact/contact.html

Silver Bullet Cutters Forum

Home of the Silver Bullet Cutter

problem at the end of a cut

problem at the end of a cut

Re: problem at the end of a cut

Re: problem at the end of a cut

Re: problem at the end of a cut

Re: problem at the end of a cut

Re: problem at the end of a cut

Re: problem at the end of a cut

Re: problem at the end of a cut

Who is online