Kathy Bessey fault. LOL 3 D bear head

Kathy Bessey fault. LOL 3 D bear head

Postby rachellann » July 25th, 2011, 6:03 pm

ok I started with the deer and then the long horn and now the bear. LOL.
3 d bear put ogether but laying flat.jpg
this is it putogether but laying flat on the tabel before gluing the back trophy base. the bear with the base glued no folding now glued each point so it would be sturdy plus used two layers for each peice -made with cardstock. the white bear is mades with a cardcoard hubby brought me home from his work place it has a platic coating on one side and only needs single layer , I tried to shade the edges to make them more visible but made a mess but sharing the phot anyways. this took about 5 hours from stating of drawings to finished project.
You do not have the required permissions to view the files attached to this post.
Helping where I can when I can.
Using a 24" Silver Bullet Pro and also have a 18" Cougar
rachellann
 
Posts: 2347
Images: 35
Joined: May 13th, 2011, 10:19 pm
Location: Iowa
Cutter: 18 Cougar, 24"Silver Bullet

Re: Kathy Bessey fault. LOL 3 D bear head

Postby kim » July 25th, 2011, 6:44 pm

Rachellann, I am so in awe of you. I don't know how you do it, but you continually amaze me with the boxes and now the 3D!!! They are awesome
Mommy to a Silver Bullet 24" , a Black Cat Cougar 24" AND a Foil Master!
kim
 
Posts: 3459
Joined: May 19th, 2011, 12:15 pm
Location: Ruston, Louisiana
Cutter: SB 24" and BC 24"

Re: Kathy Bessey fault. LOL 3 D bear head

Postby LisaH » July 25th, 2011, 7:11 pm

Ok, now I'm seeing women all across the world with "trophy heads" on their craft room walls!!!!
User avatar
LisaH
 
Posts: 5433
Images: 8
Joined: May 15th, 2011, 3:33 pm
Location: Georgia, USA
Cutter: 24" SB Pro

Re: Kathy Bessey fault. LOL 3 D bear head

Postby kathybessey » July 25th, 2011, 7:20 pm

I take all the blame Rachell!!! These are AMAZING!!!!!!!!!!!!!!!!!!!!!!
kathybessey
 
Posts: 1379
Images: 19
Joined: May 15th, 2011, 1:14 am
Location: SW Idaho

Re: Kathy Bessey fault. LOL 3 D bear head

Postby Angel135612 » July 25th, 2011, 7:36 pm

I just have one word.. okay make that two words.. GOOGLY EYES!!!! That is amazing that you can even do that Rach.
Diane in Colorado Springs
The best angle from which to approach any problem is the try-angle.
User avatar
Angel135612
 
Posts: 3038
Images: 7
Joined: May 14th, 2011, 7:51 pm
Location: Colorado Springs CO
Cutter: 24" Silver Bullet

Re: Kathy Bessey fault. LOL 3 D bear head

Postby rachellann » July 25th, 2011, 7:51 pm

Angel135612 wrote:I just have one word.. okay make that two words.. GOOGLY EYES!!!! That is amazing that you can even do that Rach.



LOL DD will add googly eyes as soon as she gets home from reading class.
Helping where I can when I can.
Using a 24" Silver Bullet Pro and also have a 18" Cougar
rachellann
 
Posts: 2347
Images: 35
Joined: May 13th, 2011, 10:19 pm
Location: Iowa
Cutter: 18 Cougar, 24"Silver Bullet

Re: Kathy Bessey fault. LOL 3 D bear head

Postby Gigi » July 25th, 2011, 9:21 pm

I am just blown away by your creations - WOW. LOVE the white bear - love them both but there is something about that white bear!!!

When you take on a challenge - you really take it on 110%!!!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Kathy Bessey fault. LOL 3 D bear head

Postby rachellann » July 25th, 2011, 10:19 pm

Thank you all very much it gives me things to do and it keeps my hands busy.
Helping where I can when I can.
Using a 24" Silver Bullet Pro and also have a 18" Cougar
rachellann
 
Posts: 2347
Images: 35
Joined: May 13th, 2011, 10:19 pm
Location: Iowa
Cutter: 18 Cougar, 24"Silver Bullet

Re: Kathy Bessey fault. LOL 3 D bear head

Postby kim » July 25th, 2011, 10:47 pm

Rachellann - YOU NEED TO MAKE A TROPHY ROOM!!! You know how you see these guys that have a room full of animal heads....you need one!
Mommy to a Silver Bullet 24" , a Black Cat Cougar 24" AND a Foil Master!
kim
 
Posts: 3459
Joined: May 19th, 2011, 12:15 pm
Location: Ruston, Louisiana
Cutter: SB 24" and BC 24"

Re: Kathy Bessey fault. LOL 3 D bear head

Postby CeCeCreates » July 25th, 2011, 11:02 pm

That is just plain awesome Rach!
User avatar
CeCeCreates
 
Posts: 809
Joined: May 14th, 2011, 8:03 pm
Location: Kettering, Ohio
Cutter: Black Cat 13 inch

Re: Kathy Bessey fault. LOL 3 D bear head

Postby Gigi » July 25th, 2011, 11:03 pm

kim wrote:Rachellann - YOU NEED TO MAKE A TROPHY ROOM!!! You know how you see these guys that have a room full of animal heads....you need one!

LOL Kim - great idea!!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Kathy Bessey fault. LOL 3 D bear head

Postby MeFlick » July 26th, 2011, 4:20 pm

Yet another Masterpiece. Thanks for sharing your awesome creations.
Go Vols!
User avatar
MeFlick
 
Posts: 1501
Joined: May 15th, 2011, 7:23 am
Cutter: 18"Silver Bullet & More

Re: Kathy Bessey fault. LOL 3 D bear head

Postby rachellann » July 26th, 2011, 7:00 pm

Thank you.
Helping where I can when I can.
Using a 24" Silver Bullet Pro and also have a 18" Cougar
rachellann
 
Posts: 2347
Images: 35
Joined: May 13th, 2011, 10:19 pm
Location: Iowa
Cutter: 18 Cougar, 24"Silver Bullet

Re: Kathy Bessey fault. LOL 3 D bear head

Postby MichelleMyBelle » August 8th, 2011, 7:02 am

this is so cool. You do need a trophy room, LOL
User avatar
MichelleMyBelle
 
Posts: 988
Images: 13
Joined: May 18th, 2011, 8:39 am
Location: PA
Cutter: Pro 18, Foil Master, Platinum 24"

Re: Kathy Bessey fault. LOL 3 D bear head

Postby Elizabeth » August 8th, 2011, 12:19 pm

Wow wow wow and WOW! That is so cool!
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet


Return to Masterpieces

Who is online

Users browsing this forum: No registered users and 2 guests