Page 1 of 1
Birthday card for movie loving friend
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
March 20th, 2017, 12:27 am
by crichtonguy
Hey All, hope everyone is well. I have a friend who has a 48th birthday coming up and made this for him as he really enjoys action films. I couldn't believe the detail on the gentleman. He is only 1 3/4" x 3/4" and I could see it had cut out his thumbs almost perfectly!
This may seem like a newb question and I haven't tried it yet. But as you can see my placement is a bit off in some places. After cutting can you use transfer tape to keep the placement or is it too tacky and will rip the card stock? The digital file I created is spaced perfectly but my hands shake a bit too much to eyeball it when assembling.
Re: Birthday card for movie loving friend
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
March 20th, 2017, 1:51 am
by Gigi
Wow - what an awesome card. I love it! Your friend is going to be so impressed!!
As far as transfer tape, I have tried that before by accident and it did stick to the card stock. You might try the low tack masking tape (painters tape_ or the EZ release tape at art stores or craft stores.
Another thing you could do is take the card stock that you are going to cut the design from and back it with double sided adhesive. Leave the backing on and put it on your mat. Cut out your design, remove it from the mat and then peel the backing sheet off with the pieces intact. You could run the low tack tape over the front so the pieces don't move and then you will have them ready to adhere with the adhesive so there will be less chance of movement. Hope that made sense. It's late and my brain is fuzzy!
Re: Birthday card for movie loving friend
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
March 20th, 2017, 6:35 am
by mmhockeyfan
Great card!! I've heard one may use Glad Press N Seal. I tried it and got good results.
Re: Birthday card for movie loving friend
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
March 20th, 2017, 9:11 pm
by crichtonguy
Thank you Gigi and mmhockeyfan as usual! Wonderful tips!
Re: Birthday card for movie loving friend
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
March 20th, 2017, 11:08 pm
by Gigi
You are welcome. The other thing you could do which I have done successfully, is make a box around your design so when you cut the pieces out, what remains will be a negative stencil. I hope I am saying this so it makes sense. Then place that on the card base and take your pieces for the card and place them within the scrap stencil - your placement will be perfect.
Hope that helps.
Re: Birthday card for movie loving friend
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
March 22nd, 2017, 7:17 am
by pigtailpat
try "duck" wall repair fabric tape. You can use it like a transfer tape.
Pat
Re: Birthday card for movie loving friend
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
March 23rd, 2017, 3:29 pm
by crichtonguy
Thank you Gigi. I totally saved the scrap leftover. Total face palm moment! LOL.
Pat, I will also give that a try. Thank you! The dexterity in my hands isn't what it used to be.
Re: Birthday card for movie loving friend
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
March 23rd, 2017, 5:12 pm
by Gigi
LOL - you are welcome!!! Honestly that negative stencil pattern has "saved" me many a time! Don't know why I didn't think of it immediately!!!
Now you have a lot of helpful options!
![Smile :)](./images/smilies/icon_e_smile.gif)