Father's Day card for my DH

Father's Day card for my DH

Postby Elizabeth » June 16th, 2013, 7:00 pm

Here is the Fathers Day card I made this morning for my Hubs. (Leaving it 'til the last minute as usual!)

It is almost an exact copy of one I pinned on Pinterest a bit ago, while trolling for guy cards.
DSCN6814.jpg


I used my Foil Master, and discovered that I need to turn the heat up if I am doing a sandwich of cardstock/cardstock/foil/cardstock. I normally just do cardstock/foil/cardstock, and cut it after foiling, but this time I cut first and then foiled, and needed to add an extra full size sheet of cardstock to the sandwich.
You do not have the required permissions to view the files attached to this post.
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet

Re: Father's Day card for my DH

Postby Gigi » June 16th, 2013, 8:06 pm

Wow Elizabeth - I love that - the colors are great too.

You got a super shot of the foiling . I have a hard time capturing the sheen.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Father's Day card for my DH

Postby MeFlick » June 16th, 2013, 8:45 pm

Very nice Elizabeth! I was just like you - making the Father's day cards at the last minute this morning! :oops: ;) Good thing DH decided to do lots of yard work this morning! :D Of course my kiddos thought it was better to take cards I had made then to make their own! So I went simplistic and then found 1 "incomplete" from last year and finished it off and then DS used one I had previously made as well. Maybe I will try to get pics of them tomorrow and share. These and the shirts I made for DH's partner's retirement is the first crafting I have done in months it seems!
Go Vols!
User avatar
MeFlick
 
Posts: 1501
Joined: May 15th, 2011, 7:23 am
Cutter: 18"Silver Bullet & More

Re: Father's Day card for my DH

Postby LisaH » June 16th, 2013, 8:59 pm

Great card, Elizabeth...but then, you always do beautiful work!
User avatar
LisaH
 
Posts: 5433
Images: 8
Joined: May 15th, 2011, 3:33 pm
Location: Georgia, USA
Cutter: 24" SB Pro

Re: Father's Day card for my DH

Postby Angel135612 » June 16th, 2013, 10:08 pm

Love that card Elizabeth!!!! Awesome as usual, even if it is last minute.
Diane in Colorado Springs
The best angle from which to approach any problem is the try-angle.
User avatar
Angel135612
 
Posts: 3038
Images: 7
Joined: May 14th, 2011, 7:51 pm
Location: Colorado Springs CO
Cutter: 24" Silver Bullet

Re: Father's Day card for my DH

Postby Retta » June 17th, 2013, 2:27 am

Love it. Blue and sepia, distressed!
Retta
 
Posts: 4196
Images: 5
Joined: May 14th, 2011, 10:57 pm
Location: Milford, Indiana
Cutter: 13" Cat CS4/Inkscape signcut

Re: Father's Day card for my DH

Postby PennyDuncan » June 17th, 2013, 7:17 am

I love that Elizabeth!!!!
Have a Blessed Day...Penny Duncan
http://pennyscreativearthaven.blogspot.com
User avatar
PennyDuncan
 
Posts: 3925
Images: 1
Joined: May 14th, 2011, 7:53 pm
Location: Henderson, KY USA
Cutter: 24" SB Pro

Re: Father's Day card for my DH

Postby Elizabeth » June 17th, 2013, 10:04 am

Thanks, everyone!

Glad I'm not alone in being "last minute Lizzy", Melanie!

Gigi, I don't usually have good luck taking photos of the foil either. Because I packed up my "photo booth" last week, (It is too ugly to keep out when we have a party) I just laid the card on the table by the window and took the pic from directly above. I had to Photo Shop a bit more than usual to decrease the shadows this way, but it did work well for the foil. I think the angle was better. I will have to experiment some more once I have time to set up my "booth" again. (My booth is a piece of tissue paper taped to the window as a diffuser, a piece of cardboard covered in aluminum foil as a reflector, and a couple of blank stretched canvases as a backdrop.)
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet

Re: Father's Day card for my DH

Postby PennyDuncan » June 17th, 2013, 10:17 am

Sounds like it would work very well!!!
Have a Blessed Day...Penny Duncan
http://pennyscreativearthaven.blogspot.com
User avatar
PennyDuncan
 
Posts: 3925
Images: 1
Joined: May 14th, 2011, 7:53 pm
Location: Henderson, KY USA
Cutter: 24" SB Pro

Re: Father's Day card for my DH

Postby Soraya » June 17th, 2013, 12:51 pm

lovely card. the desing and colors are just right for a guy.
Soraya
 
Posts: 490
Images: 0
Joined: September 14th, 2011, 12:49 am
Location: US
Cutter: Black Cat 15"

Re: Father's Day card for my DH

Postby kim » June 17th, 2013, 7:22 pm

Great card!!! My DH didn't get a card from me this year. I know, I am so bad. I barely got one done for my dad and FIL.
Mommy to a Silver Bullet 24" , a Black Cat Cougar 24" AND a Foil Master!
kim
 
Posts: 3459
Joined: May 19th, 2011, 12:15 pm
Location: Ruston, Louisiana
Cutter: SB 24" and BC 24"

Re: Father's Day card for my DH

Postby LisaH » June 17th, 2013, 8:24 pm

I made one for my son, dad & FIL...hubby didn't get one. :hide:
User avatar
LisaH
 
Posts: 5433
Images: 8
Joined: May 15th, 2011, 3:33 pm
Location: Georgia, USA
Cutter: 24" SB Pro

Re: Father's Day card for my DH

Postby kim » June 17th, 2013, 9:29 pm

I am so glad that I am not the only one that didn't make one for DH...... :ROFLMBO: :ROFLMBO: :ROFLMBO: I had to rush to get FIL's out in the mail which will get to him a day late. Oh well, I did go visit him on Friday to check on him ( that was the day I was going to make the card). He didn't sound good on the phone so I got worried and drove out there to visit. He was doing better and we had a great visit. So I worked on the cards on Saturday.
Mommy to a Silver Bullet 24" , a Black Cat Cougar 24" AND a Foil Master!
kim
 
Posts: 3459
Joined: May 19th, 2011, 12:15 pm
Location: Ruston, Louisiana
Cutter: SB 24" and BC 24"

Re: Father's Day card for my DH

Postby MichelleMyBelle » June 18th, 2013, 4:40 am

Elizabeth, great masculine card. Nice work!!
User avatar
MichelleMyBelle
 
Posts: 988
Images: 13
Joined: May 18th, 2011, 8:39 am
Location: PA
Cutter: Pro 18, Foil Master, Platinum 24"

Re: Father's Day card for my DH

Postby Elizabeth » June 18th, 2013, 10:09 am

Thanks!

(I didn't make DH an anniversary card! It was on the same day as DD's graduation and party, so I just didn't have time. I wouldn't have minded too much, but he found time to buy a card for me!)
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet


Return to Masterpieces

Who is online

Users browsing this forum: No registered users and 45 guests