Some projects I worked on.

Re: Some projects I worked on.

Postby JiMari » July 5th, 2013, 5:19 pm

Thanks Rachel, I have not worked much with vinyl but want to give it a try. those shirts are great.
Marianne
Yakima, WA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I don't stitch mistakes; I stitch creative enhancements.
User avatar
JiMari
 
Posts: 111
Joined: March 4th, 2012, 9:38 pm
Location: Yakima, WA
Cutter: 24 inch Cougar

Re: Some projects I worked on.

Postby Addyro » July 13th, 2014, 2:45 pm

You did the Hulk with vinyl?! It looks amazing! You just layered the vinyl on top of each other to heat set them on the shirt? It looks like it was printed on the shirt, I am very impressed! I didn't know vinyl could do that!

Any tips or advice to where to purchase vinyl? I am new to this and you are doing exactly what I want to do, I just didn't know it was possible with vinyl.

Ana
Addyro
 
Posts: 14
Joined: July 13th, 2014, 8:32 am
Cutter: Pro 24

Re: Some projects I worked on.

Postby Gigi » July 13th, 2014, 2:59 pm

Just answered you on another thread.

And yes, with quality heat resistant vinyls you can layer up to three colors - most do not recommend more than that. (I don't know if a heat press would make a difference or not.)
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Some projects I worked on.

Postby Addyro » July 13th, 2014, 3:12 pm

Thank you!
Addyro
 
Posts: 14
Joined: July 13th, 2014, 8:32 am
Cutter: Pro 24

Re: Some projects I worked on.

Postby kim » July 13th, 2014, 9:04 pm

Just love those, especially the Hulk!!!
Mommy to a Silver Bullet 24" , a Black Cat Cougar 24" AND a Foil Master!
kim
 
Posts: 3459
Joined: May 19th, 2011, 12:15 pm
Location: Ruston, Louisiana
Cutter: SB 24" and BC 24"

Re: Some projects I worked on.

Postby nannie4 » July 17th, 2014, 7:01 am

Love the Hulk. My grandson would be green with envy. ;)
nannie4
Die-cutting counts as exercise.....right?
nannscraftinest.blogspot.com
User avatar
nannie4
 
Posts: 71
Joined: July 4th, 2014, 6:05 am
Location: Ontario, Canada
Cutter: SB 13, SCAL 5 Pro, Windows 10

Re: Some projects I worked on.

Postby Sharon » July 17th, 2014, 7:44 pm

Great job!
Image
User avatar
Sharon
 
Posts: 277
Joined: May 14th, 2011, 10:01 pm
Location: San Antonio, TX
Cutter: 24" Silver Bullet Platinum

Re: Some projects I worked on.

Postby CreativePointe » July 19th, 2014, 8:48 pm

Awesome job getting the layers on so perfectly. Any tips on doing that?
User avatar
CreativePointe
 
Posts: 20
Joined: July 2nd, 2014, 9:16 pm
Location: Northern Michigan
Cutter: 24" Silver Bullet

Previous

Return to Masterpieces

Who is online

Users browsing this forum: No registered users and 18 guests

cron