A new SB 24" and 'old' version of MTC

Re: A new SB 24" and 'old' version of MTC

Postby soederg » May 28th, 2013, 4:15 pm

Yes, it will. I'm truly hoping it is not me!! :ROFLMBO: How embarrassing would that be?! Especially since I 'do things by the book.' Not saying I want these to be an inferior set, just - at the same time - don't want it to be me :ROFLMBO: :ROFLMBO:

And, yes - I researched a new cutting machine for the past year and kept coming back to the SB and Sherri - she was wonderful in replying to my inquiries. Had a wonderful conversation with her just hours before pulling the trigger on my order. She is so knowledgeable and responsive. I hated even saying anything to her about this, but I really don't think it's me. I even had my handiest of handymen husband assist me at one point - to maybe show me what I was doing wrong.
Gayle – Pray to have eyes that see the best in people, a heart that forgives
the worst, a mind that forgets the bad, and a soul that never loses faith in God.
soederg
 
Posts: 52
Joined: April 11th, 2013, 9:02 am
Location: The Woodlands, TX (North Houston)
Cutter: Silver Bullet 24"

Re: A new SB 24" and 'old' version of MTC

Postby Gigi » May 28th, 2013, 4:48 pm

So glad to hear a new set is on the way to you and hope it solves the problem! Sherri is awesome and this is just one more example. Please let us know the outcome - I am really curious now!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: A new SB 24" and 'old' version of MTC

Postby Elizabeth » May 28th, 2013, 9:11 pm

Hope the new tables solve the problem! I echo everyone's praise of Sherri's customer service. She always goes the extra mile to make sure we love our machines. She is responsible for many happy craft room moments!
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet

Re: A new SB 24" and 'old' version of MTC

Postby soederg » June 2nd, 2013, 2:32 pm

P.S. A 'final' note re the tables. Well, received another set. I don't know if my original ones were just off a tad, but- the new tables fit wonderfully - no popping out if I breath nor popping out on one side while installing the opposite. :lol: Happy. Liking the Origin Point cutting, too - who knew?!
Gayle – Pray to have eyes that see the best in people, a heart that forgives
the worst, a mind that forgets the bad, and a soul that never loses faith in God.
soederg
 
Posts: 52
Joined: April 11th, 2013, 9:02 am
Location: The Woodlands, TX (North Houston)
Cutter: Silver Bullet 24"

Re: A new SB 24" and 'old' version of MTC

Postby Angel135612 » June 2nd, 2013, 3:00 pm

Gayle, so glad the new tables fit like they are supposed to... they do make things much easier. I couldn't live with out Origin Point cutting. Can't wait to see more of your creations!!!
Diane in Colorado Springs
The best angle from which to approach any problem is the try-angle.
User avatar
Angel135612
 
Posts: 3038
Images: 7
Joined: May 14th, 2011, 7:51 pm
Location: Colorado Springs CO
Cutter: 24" Silver Bullet

Re: A new SB 24" and 'old' version of MTC

Postby Gigi » June 2nd, 2013, 3:08 pm

Great to hear Gayle. Love origin cutting - it makes the most sense to me!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: A new SB 24" and 'old' version of MTC

Postby Elizabeth » June 3rd, 2013, 6:07 pm

Great, that should make cutting much less frustrating! I love origin point cutting also. (but taking time to learn where things cut in WYSIWYG will help when you want to start drawing or engraving with your SB.)
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet

Re: A new SB 24" and 'old' version of MTC

Postby soederg » June 3rd, 2013, 8:59 pm

Hi, Elizabeth - I am taking the time to figure the WYSIWYG cutting method - thought I knew it already, but with the SB - that definitely is not the case!! I will persevere!
Gayle – Pray to have eyes that see the best in people, a heart that forgives
the worst, a mind that forgets the bad, and a soul that never loses faith in God.
soederg
 
Posts: 52
Joined: April 11th, 2013, 9:02 am
Location: The Woodlands, TX (North Houston)
Cutter: Silver Bullet 24"

Re: A new SB 24" and 'old' version of MTC

Postby LisaH » June 3rd, 2013, 9:29 pm

Gayle, the absolute easiest way for me to use WYSIWYG is to make my mat the same size as my media, place the blade tip on the bottom right corner (when facing the machine head on). It cuts perfectly every time...I'm using SCAl...but thinking MTC should work pretty much the same.
User avatar
LisaH
 
Posts: 5433
Images: 8
Joined: May 15th, 2011, 3:33 pm
Location: Georgia, USA
Cutter: 24" SB Pro

Re: A new SB 24" and 'old' version of MTC

Postby soederg » June 4th, 2013, 6:19 am

Thanks, Lisa! I will give that a try. Appreciate it.
Gayle – Pray to have eyes that see the best in people, a heart that forgives
the worst, a mind that forgets the bad, and a soul that never loses faith in God.
soederg
 
Posts: 52
Joined: April 11th, 2013, 9:02 am
Location: The Woodlands, TX (North Houston)
Cutter: Silver Bullet 24"

Re: A new SB 24" and 'old' version of MTC

Postby soederg » June 27th, 2013, 12:30 pm

-
Gayle – Pray to have eyes that see the best in people, a heart that forgives
the worst, a mind that forgets the bad, and a soul that never loses faith in God.
soederg
 
Posts: 52
Joined: April 11th, 2013, 9:02 am
Location: The Woodlands, TX (North Houston)
Cutter: Silver Bullet 24"

Previous

Return to Make The Cut!

Who is online

Users browsing this forum: No registered users and 3 guests

cron