need new machine advice

Re: need new machine advice

Postby texcycle » April 22nd, 2013, 8:51 pm

Ok, thanks. I know for sure I'm gonna need some help when I get my Bullet.
texcycle
 
Posts: 52
Joined: March 30th, 2013, 5:28 pm
Cutter: prospective buyer

Re: need new machine advice

Postby Gigi » April 22nd, 2013, 9:23 pm

Well the learning center will be a good place to start and we will be here for any questions you might have after that. Trust me, we have all experienced the learning curve and made it through! You are not alone!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: need new machine advice

Postby texcycle » April 22nd, 2013, 9:27 pm

I know I'm not alone and thankful that all of you on this forum are so willing to help me.
I'm getting excited... even more than before :)
texcycle
 
Posts: 52
Joined: March 30th, 2013, 5:28 pm
Cutter: prospective buyer

Re: need new machine advice

Postby Gigi » April 22nd, 2013, 9:40 pm

And we are excited for you! Let us know when you have ordered and we can share the anticipation!!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: need new machine advice

Postby texcycle » April 22nd, 2013, 9:42 pm

ok.. can we all have a drink together too, cause I might need one...and I don't drink!
texcycle
 
Posts: 52
Joined: March 30th, 2013, 5:28 pm
Cutter: prospective buyer

Re: need new machine advice

Postby kim » April 22nd, 2013, 9:46 pm

I'll drink with ya! LOL....I'm not much of a drinker as it affects me too easily, but I can handle a little! Or maybe I will just swig a Starbucks....that is my addiction.
Mommy to a Silver Bullet 24" , a Black Cat Cougar 24" AND a Foil Master!
kim
 
Posts: 3459
Joined: May 19th, 2011, 12:15 pm
Location: Ruston, Louisiana
Cutter: SB 24" and BC 24"

Re: need new machine advice

Postby Angel135612 » April 22nd, 2013, 9:46 pm

I'm in for a virtual Happy Hour!!!!!!! And I don't drink either!!!! I feel a Skype party coming on!!!!
Diane in Colorado Springs
The best angle from which to approach any problem is the try-angle.
User avatar
Angel135612
 
Posts: 3038
Images: 7
Joined: May 14th, 2011, 7:51 pm
Location: Colorado Springs CO
Cutter: 24" Silver Bullet

Re: need new machine advice

Postby texcycle » April 22nd, 2013, 10:07 pm

sounds great! should it be before or after I place the order?
then of course another when it arrives :D
texcycle
 
Posts: 52
Joined: March 30th, 2013, 5:28 pm
Cutter: prospective buyer

Re: need new machine advice

Postby Angel135612 » April 22nd, 2013, 10:19 pm

Before, after,during, learning, crafting. All those are good times to have a Happy Hour Skype party!!!!!!
Last edited by Angel135612 on April 23rd, 2013, 8:16 am, edited 1 time in total.
Diane in Colorado Springs
The best angle from which to approach any problem is the try-angle.
User avatar
Angel135612
 
Posts: 3038
Images: 7
Joined: May 14th, 2011, 7:51 pm
Location: Colorado Springs CO
Cutter: 24" Silver Bullet

Re: need new machine advice

Postby texcycle » April 22nd, 2013, 10:23 pm

duly noted!
texcycle
 
Posts: 52
Joined: March 30th, 2013, 5:28 pm
Cutter: prospective buyer

Re: need new machine advice

Postby Thyme » April 23rd, 2013, 1:52 am

The illustrator plugin works with Scal standard as well
User avatar
Thyme
 
Posts: 1060
Joined: April 2nd, 2012, 6:20 am

Re: need new machine advice

Postby Gigi » April 23rd, 2013, 9:36 am

Thanks Dawn - I didn't see a plug in for the regular version so good to know!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: need new machine advice

Postby Elizabeth » April 23rd, 2013, 10:19 am

I love the idea of a virtual happy hour! I for one will be having a real drink, though!
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.
http://shrinkingmimsy.blogspot.com/[/url]

Totally addicted to cutting with my new 24 inch Silver Bullet!
User avatar
Elizabeth
 
Posts: 4534
Images: 57
Joined: May 14th, 2011, 9:01 pm
Location: New Hampshire, USA
Cutter: 24" Silver Bullet

Re: need new machine advice

Postby texcycle » April 23rd, 2013, 1:23 pm

haha, Elizabeth. I'd go for the real thing if I could. I'm highly allergic to all alcoholic beverages :cry:
texcycle
 
Posts: 52
Joined: March 30th, 2013, 5:28 pm
Cutter: prospective buyer

Re: need new machine advice

Postby Thyme » April 23rd, 2013, 1:49 pm

texcycle wrote:haha, Elizabeth. I'd go for the real thing if I could. I'm highly allergic to all alcoholic beverages :cry:


Hey, me too!
User avatar
Thyme
 
Posts: 1060
Joined: April 2nd, 2012, 6:20 am

Re: need new machine advice

Postby texcycle » April 23rd, 2013, 1:57 pm

Dawn, you're allergic to alcohol? Anything else? My list is very loooong...
texcycle
 
Posts: 52
Joined: March 30th, 2013, 5:28 pm
Cutter: prospective buyer

Re: need new machine advice

Postby kim » April 23rd, 2013, 3:26 pm

my mother was allergic. I have a low tolerance. As DH said, I'm a cheap drunk. :ROFLMBO: :ROFLMBO: :ROFLMBO:
Mommy to a Silver Bullet 24" , a Black Cat Cougar 24" AND a Foil Master!
kim
 
Posts: 3459
Joined: May 19th, 2011, 12:15 pm
Location: Ruston, Louisiana
Cutter: SB 24" and BC 24"

Re: need new machine advice

Postby Thyme » April 23rd, 2013, 3:45 pm

texcycle wrote:Dawn, you're allergic to alcohol? Anything else? My list is very loooong...


It's more a case of what I am not allergic to!
User avatar
Thyme
 
Posts: 1060
Joined: April 2nd, 2012, 6:20 am

Re: need new machine advice

Postby texcycle » April 23rd, 2013, 4:00 pm

OMG! Me too!
texcycle
 
Posts: 52
Joined: March 30th, 2013, 5:28 pm
Cutter: prospective buyer

Re: need new machine advice

Postby Thyme » April 23rd, 2013, 4:49 pm

Lol, looks like we have a lot in common!
User avatar
Thyme
 
Posts: 1060
Joined: April 2nd, 2012, 6:20 am

PreviousNext

Return to Other Cutters

Who is online

Users browsing this forum: No registered users and 3 guests

cron