Inkscape template for PNC?
Posted: August 12th, 2021, 5:13 pmI have a template from a while ago that I downloaded from here. Does anyone have a new one? I can't seem to get my PNC to work from Inkscape and Signcut
Silver Bullet Cutters Forum
Home of the Silver Bullet Cutter
http://forum.silverbulletcutters.com/
Inkscape template for PNC?
http://forum.silverbulletcutters.com/viewtopic.php?f=12&t=6650
Page 1 of 1
Posted: August 12th, 2021, 5:13 pmRe: Inkscape template for PNC?
Posted: August 12th, 2021, 10:24 pmWe no longer support Signcut here - and honestly I cannot remember a PNC template. It is so seamless in SCAL and has been for years that I just jumped on the bandwagon and never looked back. I highly recommend trying it - it is so accurate and so easy. Not sure if it will work in the trial version but there have been tons of examples posted here. Not trying to get you to purchase another program, but it truly does make print and cut easier than I ever thought it could be!
Re: Inkscape template for PNC?
Posted: August 14th, 2021, 7:55 amWelcome back. Like Gigi, I didn’t recall having seen a template for Inkscape to use with Signcut. However, I also never used Signcut so that is probably why I wouldn’t remember. 
Because surely it could not be I’m getting older and remembering less. 
So, I did a quick search using the search box in the top right corner. I searched only for “template” and got about 20 pages of post going back from latest to earliest. You could use more words to try and help narrow the search if you wanted. I decided that it would have probably been a fairly old post with info., given that Signcut was involved so I went to the oldest and started a quick check moving forward. I found one on the 17th page you may be interested in. You can see it here:
viewtopic.php?f=8&t=457&p=10267&hilit=Template#p10267
I didn’t keep looking once I found that one so if this isn’t the info you are looking for, you can do the search and see if something else shows up that is.
I would suggest that, if and when you have some time, you look at SCAL as it has come a long way in 10+ years. We all become creatures of habit and figure we will do what we know but sometimes learning something new, like new software, can actually make things easier in the long run. I’m definitely guilty of that I know.
Because surely it could not be I’m getting older and remembering less. So, I did a quick search using the search box in the top right corner. I searched only for “template” and got about 20 pages of post going back from latest to earliest. You could use more words to try and help narrow the search if you wanted. I decided that it would have probably been a fairly old post with info., given that Signcut was involved so I went to the oldest and started a quick check moving forward. I found one on the 17th page you may be interested in. You can see it here:
viewtopic.php?f=8&t=457&p=10267&hilit=Template#p10267
I didn’t keep looking once I found that one so if this isn’t the info you are looking for, you can do the search and see if something else shows up that is.
I would suggest that, if and when you have some time, you look at SCAL as it has come a long way in 10+ years. We all become creatures of habit and figure we will do what we know but sometimes learning something new, like new software, can actually make things easier in the long run. I’m definitely guilty of that I know.