Can we install windows 10 ? - black cat cougar driver

Can we install windows 10 ? - black cat cougar driver

Postby riogirl71 » August 10th, 2015, 5:32 pm

I want to install Windows 10 but don't want to mess up my ability to cut! I checked and Signcut says they are compatible with Windows 10 but to check with the cutter's drivers to see if they will work!

I use signcut, inkscape and have a 15" black cat cougar from That's Scrap

Any help is appreciated!
So many ideas... so little time!
User avatar
riogirl71
 
Posts: 178
Images: 0
Joined: November 9th, 2011, 4:32 pm

Re: Can we install windows 10 ? - black cat cougar driver

Postby Sassycutter » August 10th, 2015, 9:40 pm

I upgraded to Windows 10 without any issues, however, I use MTC and SCAL. No problems with anything...so far :hide:
So much paper, so little time....
User avatar
Sassycutter
 
Posts: 405
Images: 0
Joined: June 5th, 2011, 3:46 pm
Location: Mid-Missouri
Cutter: 13" Black Cat and Foilmaster

Re: Can we install windows 10 ? - black cat cougar driver

Postby Gigi » August 10th, 2015, 10:44 pm

I am happily running windows 10. I know Brandon has been testing it with no problems and I am cutting and printing and using everything I used before without issue. Cannot speak for Signcut as we do not support that software, but I will assume that if it worked on Windows 8.1 it should also work on Windows 10.

Just have to say I LOVE Windows 10!!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Can we install windows 10 ? - black cat cougar driver

Postby MendyRap » August 13th, 2015, 12:57 pm

I am running 10 also! In fact, I had problems with MTC and 10 at first couldn't get any help so, I did the job on my SCAL 4 PRO and it worked fantastically! I usually design in MTC but after the other night I am going to take the time to learn the software better! I was so impressed with SCAL!
User avatar
MendyRap
 
Posts: 159
Images: 2
Joined: May 14th, 2011, 9:04 pm

Re: Can we install windows 10 ? - black cat cougar driver

Postby Gigi » August 13th, 2015, 1:01 pm

Great to hear. Glad you got things running in a way that was helpful to you.

I am so loving Windows 10 - first time I have really been thrilled with a Windows update. Everything seems to run better and more easily. Phew!

Enjoy learning SCAL 4 Pro - huge improvement!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Can we install windows 10 ? - black cat cougar driver

Postby pigtailpat » August 13th, 2015, 2:36 pm

Mendyrap - I am using my vacation to spend some time with SCAL. I too am very impressed. I was able to make text follow an arc with no effect. You're going to love it.

I can't comment on windows 10, as I don't have it yet. I have two scanners that must continue to work. Upgrading an OS for me is like going to the dentist (sorry tyler).

Pat
New owner of an 18" cougar and the gazelle...still a newbie at the cougar and will soon explore it............
pigtailpat
 
Posts: 880
Joined: May 14th, 2011, 7:49 pm
Location: In northeast close to Manhattan

Re: Can we install windows 10 ? - black cat cougar driver

Postby Gigi » August 13th, 2015, 4:42 pm

And I would normally agree with you , Pat but this was a piece of cake. I have yet to have one program or piece of hardware not work with it. Just amazed. And everything is SO much faster.........

Good luck when you DO decide to try it - I don't think you will regret it!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Can we install windows 10 ? - black cat cougar driver

Postby sdpamperin » March 29th, 2016, 1:02 pm

i installed win 10 and lost the driver for my black cat cougar...anyone know where i can find it?
sdpamperin
 
Posts: 1
Joined: April 27th, 2012, 5:14 am
Cutter: cricut yuck!

Re: Can we install windows 10 ? - black cat cougar driver

Postby Gigi » March 29th, 2016, 1:42 pm

If you are using SCAL, you can install the driver from within the SCAL program. That is the cleanest way to get the driver.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to Black Cat Lynx/Cougar

Who is online

Users browsing this forum: No registered users and 7 guests

cron