Help!!!

Help!!!

Postby Retta » November 18th, 2014, 1:08 pm

my numbers are off on my machine
US says .015 and Baud rate is right. I knew how to change that. The US rate should be 600.
I had trouble getting in here, thankfully got in now.
Retta
 
Posts: 4196
Images: 5
Joined: May 14th, 2011, 10:57 pm
Location: Milford, Indiana
Cutter: 13" Cat CS4/Inkscape signcut

Re: Help!!!

Postby Gigi » November 18th, 2014, 1:15 pm

So are you ok now? Just do a machine reset....
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Help!!!

Postby Retta » November 18th, 2014, 1:23 pm

no. l. forgot how? and thank you
Retta
 
Posts: 4196
Images: 5
Joined: May 14th, 2011, 10:57 pm
Location: Milford, Indiana
Cutter: 13" Cat CS4/Inkscape signcut

Re: Help!!!

Postby Gigi » November 18th, 2014, 1:38 pm

Hold down the origin button, turn the machine off and on again and when you see reset on the screen you can let go. The instructions are in the learning center too if you ever need a reminder.
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster

Re: Help!!!

Postby Retta » November 18th, 2014, 1:42 pm

thank you! It is good I do not have to use this hardly at all! L0L
Retta
 
Posts: 4196
Images: 5
Joined: May 14th, 2011, 10:57 pm
Location: Milford, Indiana
Cutter: 13" Cat CS4/Inkscape signcut

Re: Help!!!

Postby Gigi » November 18th, 2014, 5:24 pm

Good!! And you are welcome!!
Silver Bullet Admin/Tech Support


Happily using an 24" Silver Bullet Platinum

Gigi
User avatar
Gigi
 
Posts: 10432
Images: 190
Joined: May 14th, 2011, 9:53 pm
Location: Southern California
Cutter: 18" Silver Bullet Pro, Foilmaster


Return to Black Cat Lynx/Cougar

Who is online

Users browsing this forum: No registered users and 7 guests

cron